K : HPET caps 8086A201
K : kernel SVN r9227
K : 1 CPU detected
K : Attach Interrupt 6 Handler 8002639D
K : Set IDE IRQ6 return code 80069750
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr C080
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Dev: QEMU HARDDISK                            
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 3F
K : Ultra DMA set mode 05
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Device not found
K : Channel 2 Disk 1
K : Device not found
K : IDE CH1 DMA enabled
K : IDE CH2 PIO because no devices
K : Attach Interrupt 14 Handler 80027BE8
K : Set IDE IRQ14 return code 80069764
K : Attach Interrupt 15 Handler 80027BE8
K : Set IDE IRQ15 return code 80069778
K: found AHCI controller, (class, subcl, progif) = 00010601, bus = 00000000, device = 00000004, function = 00000000
K: AHCI controller MMIO = FEBF5000
K: AHCI: MMIO region size = 0x00001000 bytes
K: AHCI controller BAR5 mapped to virtual addr 80BCD000
K: AHCI: pci_status_command = 00100107
Enabling interrupts, DMA bus mastering and memory space access
K: AHCI: pci_status_command = 00100107
K: AHCI: caps: C0141F05 00000000, ver: 00010000, ghc: 80000002, pi: 0000003F
K: AHCI: port 0, cmd = 00000006, ssts = 00000113
Rebasing port 0
End rebasing port 0
K: AHCI: found drive on port 0: TYPE = 1
IDENTIFICATION RESULT: MODEL = QEMU HARDDISK                           
lba48 mode sector count = 0x00000000:01400000
disk capacity = 10240 MiB = 10 GiB
adding 'sd0'
K: AHCI: port 1, cmd = 00000006, ssts = 00000000
K: AHCI: port 2, cmd = 00000006, ssts = 00000000
K: AHCI: port 3, cmd = 00000006, ssts = 00000000
K: AHCI: port 4, cmd = 00000006, ssts = 00000000
K: AHCI: port 5, cmd = 00000006, ssts = 00000000
K: found AHCI controller, (class, subcl, progif) = 00010601, bus = 00000000, device = 00000005, function = 00000000
K: AHCI controller MMIO = FEBF6000
K: AHCI: MMIO region size = 0x00001000 bytes
K: AHCI controller BAR5 mapped to virtual addr 80CD3000
K: AHCI: pci_status_command = 00100107
Enabling interrupts, DMA bus mastering and memory space access
K: AHCI: pci_status_command = 00100107
K: AHCI: caps: C0141F05 00000000, ver: 00010000, ghc: 80000002, pi: 0000003F
K: AHCI: port 0, cmd = 00000006, ssts = 00000000
K: AHCI: port 1, cmd = 00000006, ssts = 00000000
K: AHCI: port 2, cmd = 00000006, ssts = 00000000
K: AHCI: port 3, cmd = 00000006, ssts = 00000000
K: AHCI: port 4, cmd = 00000006, ssts = 00000000
K: AHCI: port 5, cmd = 00000006, ssts = 00000000
K: AHCI controller not found
K: NVMe controller found
K : driver /sys/drivers/vidintel.sys mapped to 80CD4000
K : cpu frequency 3500035000 Hz
K : Attach Interrupt 1 Handler 80023884
K : IRQ1 return code 8006978C
K : driver /sys/drivers/PS2MOUSE.SYS mapped to 80DE3000
K : Attach Interrupt 12 Handler 80DE3567
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80E17000
LoadDrv: Error loading driver
Driver must be in /sys/drivers/ folder.
Its name must be w/o eL: /SYS/@TASKBAR Param: 
xtension and it is case-sensitive
L: /SYS/ESKIN Param: 
L: /SYS/@ICON Param: 
L: /SYS/NETWORK/NETCFG Param: A
K : driver /sys/drivers/I8254X.sys mapped to 80DFC000
K : Attach Interrupt 11 Handler 80DFC7A0
L: /SYS/NETWORK/@ZEROCONF Param: 
L: /SYS/@VOLUME Param: 
Zero-config service loaded
Trying to contact DHCP server
K : driver /sys/drivers/SOUND.sys mapped to 80E0B000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80E0C000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
L: /SYS/@SS Param: ASSM
L: /SYS/@DOCKY Param: 
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80DF2000
Trying to add virtual disk /tmp0, the size of 98 MB
TmpDisk operation completed successfully
L: /SYS/SEARCHAP Param: 
IP address 10.0.2.15 assigned to network interface 1 by DHCP
Searchap: additional partition is not found!
Searchap: second attempt after 5 seconds!
Searchap: additional partition is not found!
L: /SYS/@HOTANGLES Param: 
L: AUTORUN.DAT processed
K : destroy app object
K : destroy app object
K : destroy app object
K : destroy app object
K : destroy app object
K : destroy app object
K : destroy app object
K : destroy app object
Done in 29 sec
K : destroy app object
K : destroy app object